How to Adjust Motorcycle Front Brake (Yamaha, Honda, Kawasaki, or Suzuki)

Brake on the front wheel is the most powerful brake in motorcycle since the center of gravity will move to the front tyre as the front brake is applied. It is clear that excellent front brake condition is the important aspect of motorcycle handling, and the brake lever freeplay plays a major contribution to the brake control since the brake lever is the component in which the driver put on his command to the mechanism.
This post will show you the general procedure of how to adjust motorcycle front brake freeplay, which is you can easily do by yourself at home.

1. Check:
- Brake lever free play [a]. Out of specification → Adjust.
   Free play (brake lever): 2 ~ 5 mm (at brake lever end)
2. Adjust:
- Brake lever free play
---------------
Adjustment steps:- Loosen the locknut [1].
- Turn the

How to Adjust Motorcycle Clutch Lever Freeplay

Clutch lever freeplay is the important aspect of clutch control in motorcycle handling. However, some people might not aware about this point in the maintenance. This post will show you the general procedure about how to adjust clutch lever freeplay in motorcycle.
1. Check:
- Clutch cable free play [a] Out of specification → Adjust.
   Clutch cable free play (at the end of the clutch lever): 10 ~ 15 mm

2. Adjust:
Clutch cable free play
----------
Adjustment steps:
A.
Handlebar side
- Loosen the locknut 1.
- Turn the adjusting bolt 2 in or out until the specified clutch cable free play is obtained.
   Turn in Clutch cable free play is

How to Replace Motorcycle Engine Oil (with Pictures)

Replacing the motorcycle engine oil is quite easy. Yet, some people still don't understand how to change their own motorcycle engine oil. So in this post we will show you the step-by-step procedure of replacement and how to check if your work is on the right path.

1. Start the engine, warm it up for several minutes, and then turn it off.
2. Place a container under the engine oil drain bolt.
3. Remove:
- Engine oil filler bolt
- Engine oil drain bolt [1] (along with the gasket)

- Oil filter element drain bolt [2] (along with

How to Adjust Motorcycle Engine Throttle Cable (with Pictures)

Throttle cable free play is commonly the forgotten part of motorcycle maintenance. Despite of its minor role, throttle cable free play can significantly affect your handling ability. This post shows you the general procedure of throttle cable free play in motorcycle with carburetor.
Prior to adjusting the throttle cable free play, the engine idling speed should be adjusted.
1. Check:
- Throttle cable free play [a]
   Out of specification → Adjust.
   Free play (throttle cable): 3 ~ 5 mm at throttle grip flange.

2. Adjust:
- Throttle cable free play
---------------------
Adjustment steps:


How to Adjust Motorcycle Engine Valve Clearance

Valve clearance adjustment should be made with the engine cool, at room temperature. When the valve clearance is to be measured or adjusted, the piston must be at Top Dead Center (T.D.C) on the compression stroke. Below are the general procedure of adjustment.
Valve Clearance Adjustment
1. Remove:
- Spark plug
- Tappet cover (intake side) [1]
- Tappet cover (exhaust side) [2]

2. Remove:
- Timing mark accessing screw (with

Training for a Career in Automotive Service: Which Program should I Choose?

Those interested in a career in auto service can receive training in formal school settings—secondary, postsecondary, and vocational schools; and technical or community colleges, both private and public.

Student Work Experience
There are many ways to gain work experience while you are a student. You may already be involved in one of the following; if not, consider becoming involved in one of these programs. Job Shadowing Program In this program you follow an experienced technician or service writer. The primary objective is to expose you to the “real world,” to see what it takes to be a successful technician or service writer. By job shadowing, you will also become familiar with the total operation of a service department.
A career possibility for an experienced technician is that of a trainer for the various manufacturers or instructors for an automotive program.
Mentoring Program
This program is not the most common program, but it can be one of the most valuable. In a mentoring program, you experience the duties and responsibilities of a technician while you have someone who is successful to use as an expert. Your mentor has agreed to stay in contact with you, to answer questions, and to encourage you. When you have a good mentor,